Corps Directive 01-1306

From TRMN
Jump to navigation Jump to search
NOTE: This Wiki is the authoritative source for orders per the Fourth Space Lord. All orders have been provided by the issuing authority or are as posted in the TRMN Forums.
TRMN Orders & Directives
Joint Chiefs Directives (TRMN) Admiralty Orders (TRMN) Protector's Orders (GSN) Naval Directives (RMN) Corps Directives (RMMC) Army Directives (RMA) Home Office Directives (Civilian)

Corps Directive 01-1306 was issued 25 June 2013 under the authority of the Marshal of the Corps. It establishes regulations for the creation and use of unit guidons within the RMMC.

Order Text

To: All Officers and Enlisted in the Royal Manticoran Marine Corps
From: Marshal Sean Niemeyer, Marshal of the Corps
Re: RMMC Guidons (Corps Directive 01-1306)

As of the date of this Order, by my hand, and by the authority of the Sovereign, Queen of Manticore Elizabeth III, I hereby establish the following guidelines regarding guidons in the Royal Manticoran Marine Corps in order to help identify the various units and to help further esprit de corps;

Definition:
An organizational guidon is a designated detachment marker bearing the Royal Manticoran Marine emblem as displayed on the RMMC beret flash and the designation or abbreviated designation of the unit to which authorized. Organizational guidons are considered optional equipment and as such are not required for units or organizations within the RMMC. Guidons may either be manufactured by the units themselves or purchased.

Useage:
If a unit has chosen to either create or purchase a guidon then the following rules shall apply;

  1. An organizational guidon will be carried on all occasions of ceremony in which a unit participates,
  2. An organizational guidon will be carried at drills, on marches, or other service when prescribed by the commanding officer of the organization.
  3. An organizational guidon shall not be used in such a manner that it brings discredit upon the Royal Manticoran Navy: The Official Honor Harrington Fan Association, Inc. or any of its subordinate divisions.

Description:
RMMC organizational guidons shall be made of green wool bunting upon which insignia, letters, and numbers, as required, of gold wool bunting, shall be sewn on each side. However if wool bunting is not available heavyweight rayon banner cloth may be used. In that case the insignia, letter, and numbers shall be silkscreened on each side so that the guidon may be correctly read from either side. Regardless of the material used the guidon shall measure 1.83 feet on the hoist and 2.33 feet on the fly. A Royal Manticoran Marine Corps emblem as displayed on the RMMC beret flash, consisting of a crossed pulsar rifle and ship overtopped by a the Crown of Manticore, shall be placed in the center of each side of the guidon. The emblem shall measure approximately 10” from the lowest point to the highest point of the group and 10.5” in total width. The letters “RMMC” of single block type 4” high shall be placed centrally above the RMMC emblem offset 1” from the top edge. Letters and numerals will be consistent in size and follow the following rules; 1 number/letter – 6” high, 2-3 numbers/letters – 4 ½” high, 4 or more numbers/letters – 1 ¾” high. Numerals preceding letters will be 4 ½” high. Guidons will always have regimental numbers/letters in the lower left and lower right corners. See figure 1 for an example.
<<INSERT ILLUSTRATION>>
A dress guidon with a 2” gold fringe attached to the edges of an organizational guidon is authorized for each organizational guidon.

Types of Guidons:
There are three types of guidons authorized for use in the RMMC. Each one pertains to a different organizational level of the RMMC.

  1. Type I: (figure 2) These guidons are for use by MarDets that are attached to various ships. These include echelon sizes of Section, Squad, Rifle Platoon, Heavy Weapons Platoon, Assault Platoon, Rifle Company, Heavy Weapons Company, Assault Company, and Battalion. MarDets of any one of those sizes shall use the same type of guidon. Lettering for this type shall consist of the following;
    1. The ship name consisting of two lines of 1 ¾” text shall be placed in the lower left hand corner offset 1” from the bottom and left hand edge of the guidon. The top line shall consist of “HMS”, “GSN”, etc…, the lower line shall consist of the ship name. A ship’s name may be abbreviated in order to fit in the space allotted.
    2. The letters “MD” shall be placed in the lower right hand corner offset 1” from the bottom and the right hand edge of the guidon to designate the unit as a Marine Detachment (MarDet). The letters shall be 4 ½” in height.
    3. <<INSERT ILLUSTRATION>>
  2. Type II: (figure 3) These guidons are for use by multi-ship MarDets. These include echelon sizes of Regiment, Brigade, Division, and Expeditionary Force. MarDets of any one of those sizes shall use the same type of guidon. Lettering for this type shall consist of the following;
    1. Letters and numbers denoting the multi-ship unit number and type shall be placed in the lower left hand corner offset 1” from the bottom and left hand edge of the guidon. The multi-ship unit number shall be 4 ½” in height and the unit type letters shall be 1 ¾” in height. The following abbreviations shall be used for unit type: RG – Regiment, BD – Brigade, DV – Division, FC – Expeditionary Force.
    2. Numbers denoting the sub-unit shall be placed in the lower right hand corner offset 1” from the bottom and right hand edge of the guidon. The numbers shall be 6” in height. <<INSERT ILLUSTRATION>>
  3. Type III: (figure 4) These guidons are for use by planetary installations only. For the RMMC these are Planetary Force units. Lettering for this type shall consist of the following;
    1. The installation name consisting of one or two lines of 1” text shall be placed in the lower left hand corner offset 1” from the bottom and left hand edge of the guidon. An installation’s name may be abbreviated in order to fit in the space allotted.
    2. The letters “PF” shall be placed in the lower right hand corner offset 1 ½” from the bottom and the right hand edge of the guidon to designate the unit as a Planetary Force. The letters shall be 4 ½” in height.
    3. <<INSERT ILLUSTRATION>>

In Honour of the Queen!

Issued by:
Marshal of the Corps
Lord Sir Sean Niemeyer, KCR, OE
Commandant
Royal Manticoran Marine Corps
First Earl, New Ulyanovsk


See Also

External Links

Retrieved from "https://wiki.trmn.org/wiki/index.php?title=Corps_Directive_01-1306&oldid=1388"