RMMM:Service Dress Uniform/C-1 through C-8 (NO ENDORSEMENT)

Royal Manticoran Merchant Marine Uniform Regulations Quick Navigation
Front	Convention Minimum	Working Uniform	Shipboard Uniform	Service Dress Uniform	Dress Uniform	Formal Dress Uniform

Service Dress Uniform: Royal Manticoran Merchant Marine

The service dress uniform is the most formal uniform afforded personnel in the grades of C-1 through C-8.

Uniform

Tunic

Personnel in the grades of C-1 through C-8 will wear a short, Eisenhower style, tunic in navy blue. The tunic should fall to the wearers waist when worn. This tunic does not feature a plastron (bib). The tunic will zip up the front and features a zipper flap, closing to the right, that hides the zipper from view. The collar is mandarin, in the same styling as those found on the uniform tunics of the Star Empires' armed forces. The tunic does not feature epaulets, or shoulder loops.

Undershirt

Personnel in the grades of C-1 through C-8 will wear a white, close fitting, mock turtleneck.

Trousers

Personnel in the grades of C-1 through C-8 will wear gray uniform trousers and a gray uniform belt with a gold military friction buckle. The trousers are worn bloused with black, low-topped boots, or worn unbloused with shined, black, military style, low quarters.

Service Dress Uniform Example C-1 through C-8 Unassigned

Headgear

All ranks will wear a navy blue RMMM beret with the RMMM flash positioned over the left eye

Standard RMMM Beret

Branch Patch

All ranks will wear the RMMM patch affixed to the upper right sleeve.

RMMM Branch Patch

Assignment and Company Patches

Personnel in the grades of C-1 through C-8 will wear their assignment patch and company patch affixed to the upper left sleeve.

Standard Assignment Patch Example RMMS Morning Star	Company Patch Example Karstadt Lines, Karstadt Group Ldt.

Name Badge

All ranks will wear a gold, metal, name badge with black lettering. The name badge should be affixed to the right breast of the uniform tunic with clutch pins or magnets. The name badge features the wearers LAST NAME, FIRST INITIAL. Those personnel honored with a Peerage in The Royal Manticoran Navy, The Official Honor Harrington Fan Association, may elect to display their Peerage name instead. For example: CALABASAS. For proper placement, please see the measurement guide graphics at the bottom of this page.

RMMM Name Badge

Rank Insignia

Personnel in the grades of C-1 through C-8 will display the appropriate number of chevrons/rockers for their current rank on the left sleeve only. The rank should be affixed midway between the elbow and the bottom of the company patch. For proper placement, please see the measurement guide graphics at the bottom of this page.

To attach rank insignia to a uniform, it is recommended that the insignia first be sewn to a piece of navy blue felt. The felt should then be trimmed, leaving a small border which can then be used to sew the insignia to the uniform tunic. 1/4" is a recommended starting point. Not only does this technique provide a sharp look, but it will make attaching the insignia much easier, especially when multiple chevrons are necessary.

Tunic Collar C-1 through C-8 Unassigned

Apprentice Spacer C-1 Unassigned	General Vessel Assistant C-2 Unassigned	Spacer I C-3 Unassigned	Spacer II C-3 Unassigned	Spacer III C-3 Unassigned	Spacer IV C-6 Unassigned	Spacer V C-7 Unassigned	Spacer VI C-8 Unassigned

Service Stripes

Personnel in the grades of C-1 through C-8 will display the appropriate number of gold service stripes, if earned, on the lower left sleeve. For proper placement, please see the measurement guide graphics at the bottom of this page. For further information on service stripes please consult Admiralty Order 1306-02 or Uniform FAQ 008 on the TRMN Forums.

To attach the service stripes to a uniform, it is recommended that the stripes first be sewn to a piece of navy blue felt. The felt should then be trimmed, leaving a small border which can then be used to sew the stripes to the uniform tunic. 1/4" is a recommended starting point. Not only does this technique provide a sharp look, but it will make attaching the stripes much easier, especially when multiple stripes are necessary.

Awards

Ribbons

All ranks may display ribbons, if earned, on the left breast of the uniform tunic. For proper placement, please see the measurement guide graphics at the bottom of this page.

Aerospace Wings and Space Warfare Pin

All ranks are authorized to wear aerospace wings, if earned, directly above the ribbons of the left breast of the uniform tunic. Additionally, personnel are authorized to display a space warfare pin, if earned, directly below the ribbons on the left breast of the uniform tunic. The wings and space warfare pins are metal and should be gold or silver, as appropriate. For proper placement, please see the measurement guide graphics at the bottom of this page.

Enlisted Aerospace Wings Example May be worn by C-2 through C-8 if earned.	Enlisted Space Warfare Pin Example May be worn by C-2 through C-8 if earned.

For more information on the Aerospace Wings, the different varieties, and how to earn them, please click here.
For more information on the Space Warfare Pins, including how to earn them, please click here.

Award Stripes

All ranks may display award stripes, if earned, on the upper right sleeve of the uniform tunic, below the RMMM patch. The stripes are worn on the outer part of the sleeve and run from the back sleeve seam to the front sleeve seam at an angle. The ends of the stripes should be folded over, or ideally, tucked into the seams. For proper placement, please see the measurement guide graphics at the bottom of this page.

Chivalrous Orders

Members may display any earned chivalrous awards that are represented by an award ribbon or a chest star. The wearing of awards that hang about the neck (with the exception of the Parliamentary Medal of Valor and the Star of Grayson) and those represented by a sash are specifically prohibited with the Service Dress Uniform. For more information on this topic please consult TRMN-05, "Proper Wear and Display of the Knightly Orders and Chivalrous Awards."

Measurement Guide

Right Arm Example All Ranks	Left Arm Example C-1 through C-8	Left Arm Cuff Example C-1 through C-8	Tunic Detail C-1 through C-8

Wearing of Arms

If authorized by company leadership to carry personal arms, a plain black, tactical style, gun belt may be worn with a standard Manticoran military sidearm and its accompanying drop leg holster. The belt should be worn under the tunic at the waist of the trousers.

Necessaries

The following links represent recommended sources for RMMM uniform items.

Uniform

Service Dress Uniform Pre-Order (Specify for RMMM - Bandshoppe color is NAVY)

Uniform Trousers (Mens) - Charcoal Gray

Uniform Trousers (Womens) - Charcoal Gray

Uniform Trouser Belt (Unisex) - Charcoal Gray

Beret - Navy Blue

Black Boots

Black Low Quarters

Name Badge, Ribbons and Awards

Name Badge (LAST, FI - font Optima)

Ribbons (Note: RMN ribbons should be substituted until such time as RMMM specific ribbons may become available)

Aerospace Wings (Choose the enlisted version you have earned)

Enlisted Space Warfare Pin (Choose the version appropriate to the level you have earned)

Award Stripes (Choose those which you are authorized to display)

Chivalrous Orders (Choose the ribbon(s) and chest star(s) that you are authorized to display)

Patches and Rank Insignia

Branch Patch (Note: Please utilize the logo version of the patch until such time as the uniform version may become available)

Beret Patch (Note: Please utilize the RMN beret patch until such time as the RMMM beret patch may becomes available)

RMMM Rank Chevron

RMMM Rank Chevron/Rocker Combo

Service Stripes

Ship Assignment Patch - Contact Chapter Leadership

Company Patch - Contact Chapter Leadership