RMMM:Service Dress Uniform/C-18 through C-20

From TRMN
Jump to navigation Jump to search
Royal Manticoran Merchant Marine Uniform Regulations Quick Navigation
Front Convention Minimum Working Uniform Shipboard Uniform Service Dress Uniform Dress Uniform Formal Dress Uniform

Service Dress Uniform: Royal Manticoran Merchant Marine

The service dress uniform is the standard uniform for personnel in the grades of C-18 through C-20 for all but the most formal of activities.


Uniform

Tunic

Personnel in the grades of C-18 through C-20 will wear a short, Eisenhower style, tunic in navy blue. The tunic should fall to the wearers waist when worn. This tunic does not feature a plastron (bib). The tunic will zip up the front and features a zipper flap, closing to the right, that hides the zipper from view. The collar is mandarin, in the same styling as those found on the uniform tunics of the Star Empires' armed forces. The tunic does not feature epaulets, or shoulder loops. Additionally, personnel will trim their tunic with 1/4" grosgrain ribbon. The trim will be placed along the upper collar, and extend down the outer edge of the zipper flap. The trim color for all personnel in the grades of C-18 through C-20 will be yellow gold.

Undershirt

Personnel in the grades of C-18 through C-20 may wear a white, close fitting, mock turtleneck or a white, mandarin collar, dress shirt. The dress shirt should be worn closed at the neck.

Trousers

Personnel in the grades of C-18 through C-20 will wear navy blue uniform trousers and a navy blue uniform belt with a gold military friction buckle. The trousers are worn bloused with black, low-topped boots, or worn unbloused with shined, black, military style, low quarters.

Service Dress Uniform Example
C-18 through C-20
This image shows a member of the Deck Department
C18-C20SDU-RMMM.png

Headgear

All ranks will wear a navy blue RMMM beret with the RMMM flash positioned over the left eye

Standard RMMM Beret
RMMM BERET.png


Branch Patch

All ranks will wear the RMMM patch affixed to the upper right sleeve.

RMMM Branch Patch
RMMM-Branch-Patch.png


Assignment and Company Patches

Personnel in the grades of C-18 through C-20 will wear their company patch only affixed to the upper left sleeve.

Company Patch Example
Karstadt Lines, Karstadt Group Ldt.
Karstadt Lines.png


Name Badge

All ranks will wear a gold, metal, name badge with black lettering. The name badge should be affixed to the right breast of the uniform tunic with clutch pins or magnets. The name badge features the wearers LAST NAME, FIRST INITIAL. Those personnel honored with a Peerage in The Royal Manticoran Navy, The Official Honor Harrington Fan Association, may elect to display their Peerage name instead. For example: CALABASAS. For proper placement, please see the measurement guide graphics at the bottom of this page.

RMMM Name Badge
SEM-Universal Name Badge.png


Rank Insignia

Personnel in the grades of C-18 through C-20 will display rank insignia on each collar. Additionally, they will display the appropriate number of stripes for their current rank, as well as their departmental insignia on the cuff of each sleeve. The rank insignia and stripes will be gold or silver as appropriate, and the departmental insignia will be embroidered in a gold metallic that matches the rank stripes. Departmental Insignia should be 1" across and either 1", or appropriately proportional, in height. For proper placement, please see the measurement guide graphics at the bottom of this page.


Tunic Collar
C-18
C18 SDC-RMMM.png
Fleet Manager
C-18
Deck Department
Fleet Port Manager
C-18
Engineering Department
Fleet Passenger Director
C-18
Catering/Hotel Department
Fleet Medical Director
C-18
Medical Department
C18 Sleeve-Fleet Manager.png
C18 Sleeve-Fleet Port Manager.png
C18 Sleeve-Fleet Passenger Director.png
C18 Sleeve-Fleet Medical Director.png


Tunic Collar
C-19
C19 SDC-RMMM.png
Superintendent
C-19
Administrative
Drawn from any Department
C19D Sleeve-Superintendent.png
C19E Sleeve-Superintendent.png
C19H Sleeve-Superintendent.png
C19M Sleeve-Superintendent.png


Tunic Collar
C-20
C20 SDC-RMMM.png
Managing Director
C-20
Administrative
Drawn from any Department
C20D Sleeve-Mangr Director.png
C20E Sleeve-Mangr Director.png
C20H Sleeve-Mangr Director.png
C20M Sleeve-Mangr Director.png

Awards

Ribbons

All ranks may display ribbons, if earned, on the left breast of the uniform tunic. For proper placement, please see the measurement guide graphics at the bottom of this page.

Aerospace Wings and Space Warfare Pin

All ranks are authorized to wear aerospace wings, if earned, directly above the ribbons of the left breast of the uniform tunic. Additionally, personnel are authorized to display a space warfare pin, if earned, directly below the ribbons on the left breast of the uniform tunic. The wings and space warfare pins are metal and should be gold or silver, as appropriate. For proper placement, please see the measurement guide graphics at the bottom of this page.

Officer Aerospace Wings Example
May be worn by C-12 through C-23 if earned.
Officer Space Warfare Pin
May be worn by C-12 through C-23 if earned.
RMN Aerospace Wings Officer.png
SWP-Officer.png

For more information on the Aerospace Wings, the different varieties, and how to earn them, please click here.
For more information on the Space Warfare Pins, including how to earn them, please click here.

Award Stripes

All ranks may display award stripes, if earned, on the upper right sleeve of the uniform tunic, below the RMMM patch. The stripes are worn on the outer part of the sleeve and run from the back sleeve seam to the front sleeve seam at an angle. The ends of the stripes should be folded over, or ideally, tucked into the seams. For proper placement, please see the measurement guide graphics at the bottom of this page.

Chivalrous Orders

Members may display any earned chivalrous awards that are represented by an award ribbon or a chest star. The wearing of awards that hang about the neck (with the exception of the Parliamentary Medal of Valor and the Star of Grayson) and those represented by a sash are specifically prohibited with the Service Dress Uniform. For more information on this topic please consult TRMN-05, "Proper Wear and Display of the Knightly Orders and Chivalrous Awards."


Measurement Guide

Right Arm Example
All Ranks
Left Arm Example
C-18 through C-20
Both Arms Cuff Example
C-18 through C-20
RightArmAllOthers-RMMM.png
LeftArmWorking-RMMM-C18-C20.png
RMMM C18-20 CUFF ARRANGEMENT.png
Tunic Detail
C-18 through C-20
Collar Detail
C-18 through C-20
SDUFront-RMMM-C18-C20.png
Collar Detail-RMMM-C18-C20.png

Wearing of Arms

If authorized by company leadership to carry personal arms, a plain black, tactical style, gun belt may be worn with a standard Manticoran military sidearm and its accompanying drop leg holster. The belt should be worn under the tunic at the waist of the trousers.


Necessaries

The following links represent recommended sources for RMMM uniform items.

Uniform

Service Dress Uniform Pre-Order (Specify for RMMM - Bandshoppe color is NAVY)

Uniform Trousers (Mens) - Dark Navy

Uniform Trousers (Womens) - Dark Navy

Uniform Trouser Belt (Unisex) - Navy

Beret - Navy Blue

Black Boots

Black Low Quarters

Collar Trim

All Departments - #660 Yellow Gold

Name Badge, Ribbons and Awards

Name Badge (Color 277 - Radiant Gold/Black - LAST, FI - font Optima)

Ribbons (Note: RMN ribbons should be substituted until such time as RMMM specific ribbons may become available)

Aerospace Wings (Choose the officer version you have earned)

Officer Space Warfare Pin

Award Stripes (Choose those which you are authorized to display)

Chivalrous Orders (Choose the ribbon(s) and chest star(s) that you are authorized to display)

Patches and Rank Insignia

Branch Patch (Note: Please utilize the logo version of the patch until such time as the uniform version may become available)

Beret Patch (Note: Please utilize the RMN beret patch until such time as the RMMM beret patch may becomes available)

Company Patch - Contact Chapter Leadership

Rank Insignia

Embroidered Department Insignia (Note: Specify RMMM C-18 through C-20. You will need to provide your department. Send the shop a private message to specify)

Rank Braid (Note: Typically 12" is sufficient per ring per sleeve - make sure to order the appropriate amount suitable for your grade. The grade of C-18 utilizes 1/2" permagold braid and 1" permagold braid. All other grades utilize 1" permagold braid)